AFG31000 Arbitrary Waveform Generator Analog Circuit Verification

We live in an analog world. All physical quantities are captured and represented with analog signals. Therefore, performance verification of analog circuits such as amplifiers, filters and converters is required.

• InstaView™ Technology eliminates additional waveform uncertainty on impedance-mismatched DUT

• Frequency range: 25 MHz to 250 MHz

• No external filters or attenuators required due to high signal fidelity

• Thanks to frequency agility and calibrated sine wave flatness, frequency response testing can be completed easily

AFG31000 Arbitrary Function Generator for Real-world Signal Replication

Sensors are widely used in almost all modern electronic design fields, from automotive to medical devices and consumer electronics. Until now, capturing and replicating waveforms with an AFG for troubleshooting or verification has always been a highly challenging process.

• ArbBuilder can directly import CSV format waveforms saved from multiple Tektronix oscilloscope product lines

• Up to 128M points of arbitrary memory greatly extends signal length

• Low noise floor delivers clearer signals

Function Verification and Performance Calibration for AFG31000 Arbitrary Waveform Generator

Before product launch, test engineers must run a large number of test cases to ensure the product meets technical specifications. However, this process is quite time-consuming and repetitive.

• Fully programmable, with intuitive user interface for both automatic testing and manual testing

• Waveform sequencing enables users to sequence all test programs into one single sequence

• Flexible repeat and jump functionality guarantees high test efficiency

• Up to 128M points of arbitrary memory and built-in non-volatile flash memory store all waveforms and test programs

AFG31000 Arbitrary Function Generator Synchronizes with System Clock or Pulse

All circuits in digital design operate simultaneously at clock speed. All devices in a large system must be coordinated with trigger signals to ensure normal and reliable operation. Using AFG31000 is an effective way to generate clock and trigger pulses.

• Pulse/Square wave frequency range up to 160 MHz

• Frequency agility enables seamless switching between different clock rates

• Easy-to-use wizard guides you through synchronization of multiple devices to increase channel count

• Low jitter level gives you greater confidence when triggering your system

AFG31000 Arbitrary Waveform Generator Double Pulse Test

Double pulse test is a method for measuring parameters of switching devices and evaluating the dynamic performance of power devices such as MOSFET and IGBT. It can measure turn-on parameters, turn-off parameters and reverse recovery parameters.

Performing this test allows you to:

• Ensure that power devices such as MOSFET and IGBT meet the specifications specified in the product datasheet

• Verify the actual values and deviations of power devices or power modules

• Measure parameters of these switching devices under various load conditions, and verify performance across multiple devices

AFG31000 Arbitrary Waveform Generators for Advanced Research and Education

Researchers and educators require a wide range of signals to complete their research and teaching work. Tests can be as simple as a series of pulses simulating the output of a Geiger-Muller counter, or as complex as a long baseband IQ.

• InstaView™ technology eliminates output waveform uncertainty when connected to complex loads

• Integrated multiple features and capabilities

• Dual operating modes balance usability and flexibility to generate the most complex waveforms

• Onboard ArbBuilder enables direct on-screen creation and editing of arbitrary waveforms