See signal details you have never seen before.

• The oscilloscope front-end ASIC chip TEK061 achieves ultra-low noise floor.

• 12-bit resolution at 5 GHz, up to 16-bit resolution at 200 MHz

• Noise at 1 mV/div and 1 GHz <55 µV

• Noise at 50 mV/div and 10 GHz <1.25 mV

Synchronized Multi-channel Spectrum Analysis

Get 4, 6 or 8 spectrum analysis channels. The hardware digital down converter (DDC) parallel to time domain signal processing features powerful performance.

• Any analog channel can be configured as waveform, spectrum or both

• Plot and trigger on changes of RF frequency or amplitude

• Spectrum and time domain waveforms are synchronized to correlate RF and time domain events

• Spectrum controls (such as center frequency and RBW) are completely independent of time domain controls

Simplified Advanced Analysis

Easily verify jitter on GHz clocks and serial buses. With integrated measurements, you can include statistics in your daily toolbox. Add advanced and routine measurements with the same simple drag-and-drop operation.

Automated Measurement and Trend AnalysisSpectrum View Synchronized Multi-channel Spectrum AnalysisAdvanced Jitter AnalysisAdvanced Power AnalysisLow-Noise Ripple MeasurementMemory Analysis and DebuggingHigh-Speed Serial Compliance5G NR Signal Analysis

Fidelity Starts at the Probe Tip

With 4, 6, or 8 FlexChannel® inputs, you can probe circuits with the standard 1 GHz probes. You can connect high-performance single-ended active probes or differential probes, or use a TriMode probe to perform both single-ended and differential measurements with one probe. Connect the TLP058 logic probe to any FlexChannel input to get 8 digital channels and expand system visibility.

• Built-in 1 MΩ to 50 Ω Input Terminals

• Each input includes a 1 GHz low-load passive probe

• TekVPI probes connect to 10 W probe power per channel, supporting differential signal, current, power rail and optical isolation probes

• TDP7700 Series 4, 6, 8 and 10 GHz TriMode Probes - Ideal for high-speed communication measurements

Specification Overview

Input Channels
4, 6 or 8 FlexChannel inputs.
Each FlexChannel provides one analog signal input or 8 digital logic inputs when connected to a TLP0581 probe

Bandwidth1
1, 2.5, 4, 6, 8 or 10 GHz

Sampling Rate
50 GS/s (2 analog channels)
25 GS/s (4 analog channels)
12.5 GS/s (more than 4 analog channels)

Record Length 1
Up to 1 G points (4 channels)
Up to 500 M points (more than 4 channels)

Signal Generator1
13 standard waveforms, plus arbitrary waveform

Digital Voltmeter2
4-digit

Trigger Frequency Counter 2
8-digit

Display
15.6 inch (385 mm)
TFT color HD (1,920 x 1,080) resolution capacitive (multi-touch) touch screen

1 - Optional and Upgradeable
2 - Free after product registration