N9010B EXA Signal Analyzer
- ModelN9010B
- AttributesSignal & Spectrum Analyzer
- Category KEYSIGHT > Signal / Spectrum Analyzer
- BrandKEYSIGHT
- DescriptionWhen purchasing the Keysight N9010B EXA signal analyzer, verify the frequency option, analysis bandwidth and preamplifier configuration. This page provides its core specifications, performance features and interface information to help you evaluate an eco
Detailed Introduction Technical Documents
Overview
It is a cost-effective signal analyzer for millimeter-wave bands, helping you achieve the optimal balance between shortening test time and reducing test costs.
Key Features
Frequency Range: 10 Hz to 3.6 / 7.0 / 13.6 / 26.5 / 32 / 44 GHz (Optional)
Displayed Average Noise Level (DANL): As low as -163 dBm (Typical, with preamplifier)
1 dB Gain Compression (Third-order Intercept): +9 dBm (Nominal)
Analysis Bandwidth: 10 MHz standard, 25 MHz or 40 MHz optional
Equipped with multi-touch screen, supports one-click PowerSuite measurement
Applications
Transmitter testing for wireless communications (5G, W-CDMA, etc.)
Radar and electronic warfare signal analysis for aerospace and defense
Harmonic and third-order intermodulation distortion testing for devices and modules
Spectrum monitoring and EMC pre-compliance testing
Technical Specifications
Parameter | Detailed Specification |
Frequency Range | Depends on option: |
Amplitude Measurement Range | From Displayed Average Noise Level (DANL) to +23 dBm |
Resolution Bandwidth (RBW) | 1 Hz to 10 MHz (step supported) |
Displayed Average Noise Level (DANL) | Typical (preamplifier on): |
1 dB Gain Compression (Third-Order Intercept) | +9 dBm (nominal, 20 MHz to 26.5 GHz) |
Frequency Reading Accuracy | ±(marker frequency × frequency reference accuracy + 0.25% × span + 5% × RBW + 2 Hz) |
Phase Noise | Not specified directly, indicated indirectly by residual FM specification, typical value is (10 Hz × N) p-p (within 20 ms) |
Amplitude Accuracy | Total absolute amplitude accuracy: ±0.40 dB @ 50 MHz (with preamplifier), ±(0.40 dB + frequency response) over full frequency range |
Analysis Bandwidth | - Standard: 10 Hz to 10 MHz |
Accessories
Standard: Power Cord, Calibration Certificate, Quick Start Guide
Options:
Frequency Options: 503, 507, 513, 526, 532, 544
Preamplifiers: P03, P07, P13, P26, P32, P44
Analysis Bandwidth: B25, B40
Precision Frequency Reference: PFR
Electronic Attenuator: EA3
Noise Figure Measurement: NF2
Interfaces
Standard:
Front Panel: RF Input (Type-N or 2.4mm), Probe Power Port, 3 x USB 2.0 Host Ports
Rear Panel: 10 MHz Reference Input/Output (BNC), Trigger 1/2 Input/Output (BNC), GPIB, LAN (1000Base-T), USB 2.0/3.0, VGA Output
Options:
External Mixer Interface (EXM): SMA female (for Options 532/544)
Wideband IF Output (CR3): SMA female
Programmable IF Output (CRP): SMA female
Physical Specifications
Dimensions: 177 mm (Height) × 426 mm (Width) × 368 mm (Length)
Weight: Net weight approx. 18 kg
Reminder: The product information above is compiled based on official technical materials from Keysight Technologies, for reference only. Product specifications, options and configurations are subject to change with manufacturer updates. Please refer to the actual delivered product and latest official release for details.
